Adaptive Mean + ATR Bands

A plain-English guide. You do not need to know statistics. Read the DO THIS row at the top of the table first — one line that tells you what to do. The labels on the chart say the same thing at the bar it happened: green ▲ = go long, red ▼ = go short, ◔ ◑ ● = take money off, ✗ = you are out.

gold line = the mean ▲ green = long play ▼ red = short play △ ▽ = fade (day trade) purple = session VWAP research tool · no auto orders

What this tool is trying to find

Price is a dog on a leash. The owner is the mean.

  1. 01
    The mean (gold line) — the average price over the last 5 trading days (intraday) or 20 days (daily chart). The dog always comes back to the owner eventually.
  2. 02
    The ruler (ATR) — how far price is from the mean, measured in “normal days of movement”. 1 ATR = one typical day’s range. 2 ATR = the dog has run two days’ worth of leash.
  3. 03
    Trade 1 — the Fade (day trade) — the dog ran 2+ days of leash and just turned back. Bet on the return to the owner. △ / ▽
  4. 04
    Trade 2 — the Play (swing) — price spent days on one side of the mean, then closed back through it and held. Bet the new side continues for days. ▲ LONG ▼ SHORT
Two trades, opposite ends of the same ruler. The Fade enters far from the mean betting on a return. The Play enters at the mean betting on continuation. Both can be open at the same time.
What the #27 and F3 tags mean. Every trade gets a number when it opens, and every label that belongs to that trade carries the same number — the entry, each take-off, the exit. # = a swing Play (#1, #2, #3 …). F = a Fade (F1, F2, F3 …). They are counted separately so that when a Play and a Fade are both on screen, you can tell at a glance which ◔ or ✗ belongs to which trade. #27 simply means “the 27th swing Play since this chart loaded” — the number itself carries no other meaning.
This is a research tool. It tracks one Play and one Fade at a time, with a stop and an “R” score, and prints every exit. It does not place orders.

The only row you must read: DO THIS

Top row of the table (v4.24+). Two or three short lines, colored by the verb — green long, red short, gold take-off, slate exit, grey wait. It is built only from what the engine already decided; it says in one place what the labels and the P&R row say in pieces. When several things apply at once, exits win over take-offs, take-offs over entries, entries over holds.

Reading every number on the line

Take a real one: HOLD the long play #27 · stop 57.27 · open +0.4R · next: 30% off at 70.16

PieceWhat it meansWhat you do with it
HOLD the long play The verb. You are in a swing trade, long. Nothing fired this bar Stay in. Manage the stop. Don’t add
#27 Trade number 27 since the chart loaded. Every ◔ ◑ ● ✗ label with #27 belongs to this trade Ignore labels with other numbers — they’re other trades
stop 57.27 A confirmed bar close below 57.27 ends the trade (✗ STOPPED). It was the low of the pullback that set up the trade, capped at 2 ATR from entry Your stop order goes here. Entry − 57.27 = your risk per share = 1R
open +0.4R Right now you are up 0.4 × the risk you took. If you risked $1.00/share, you’re up $0.40. +1R = made what you risked. −1R = lost it. The R scale never changes when the stop moves — it’s always measured against the original risk Judge the trade in R, not dollars. A +2R winner is a +2R winner on 100 shares or 10,000
next: 30% off at 70.16 The next thing that will happen. 70.16 = the mean + 1 daily ATR (one normal day above the gold line). When price gets there, ◔ 30% prints and DO THIS says TAKE 30% OFF You can put a sell for 30% at 70.16 now if you want it working
Hover the row. The DO THIS tooltip decodes exactly these pieces for whatever is on the line right now — the trade number, the stop and why it sits there, the R, the target price and how it was calculated. Every other table cell has the same treatment (see Tooltips).

Every instruction it can print

DO THIS says What it means What you do
EXIT play #7 — closed through the stop · −1.0R A confirmed close beyond the stop EXIT — you should already be flat
EXIT play #7 — voided, closed back through the mean on entry day Day-one fake. The reclaim didn’t hold EXIT flat
CLOSE THE REST (20%) of play #7 — daily close back through the mean · +2.7R The final ladder exit. 20 / 70 / 100% depending on what already paid CLOSE what is left
EXIT fade F2 — new extreme past the stretch · −1.0R The fade’s stop EXIT
CLOSE THE REST of fade F2 — reached the mean · +2.9R Fade target 2. Done CLOSE
TAKE 50% OFF play #7 — trail broke and turned · +2.4R Ladder step 2 SELL HALF of what you hold
TAKE 30% OFF play #7 — reached the 1 ATR band · +1.1R Ladder step 1 SELL 30%
TAKE HALF OFF fade F2 — at the 1 ATR band · +1.4R Fade target 1 SELL HALF
GO LONG play #7 @ 93.20 · stop 92.40 · T1 at +1 ATR (98.02) Swing entry just fired GO LONG, stop at 92.40
GO SHORT play #8 @ … · stop … · T1 at −1 ATR (…) Swing short just fired GO SHORT, stop shown
GO LONG fade F2 @ 88.90 · stop 88.10 · T1 90.25 · T2 mean 92.60 · day trade Fade entry just fired (short version is red) GO LONG as a day trade, stop at 88.10
HOLD the long play #7 · stop 92.40 · open +0.8R · next: 30% off at 98.02 You are in a Play. Tells you the stop, open R, and the next thing that will happen STAY — manage the stop. If a fade is also open it says so at the end
HOLD fade F2 (long) · stop 88.10 · open +0.6R · next: half off at 90.25 · flat by the close is on you You are in a Fade STAY — and remember the tool will not flatten it at the bell
WAIT — reclaim pending. Needs today’s first bar close to hold above the mean, then look for ▲ LONG Yesterday’s close crossed the mean; not confirmed yet WAIT — do not front-run
WAIT — tripwire armed at 94.10. Trade only on a confirmed close above it The dotted gray line is live WAIT for the break
AVOID chasing — price is EXTREME (3.20 ATR from the mean). A fade may set up if it closes back inside ±2 State row is red AVOID new entries in the direction of the move
WATCH — price is EXTENDED (2.30 ATR). Fade SHORT only if it closes back inside ±2 and no label says otherwise State row is orange. A fade could trigger on the next close inside WATCH for the ▽ label — don’t anticipate it
NO TRADE — nothing armed. Watch for ▲ ▼ △ ▽ labels Flat, nothing pending Nothing. (If it adds a full day’s range is already used, be extra patient)
The same line goes into every alert as the do_this field, so a webhook log or a phone notification carries the instruction, not just the numbers.

Where everything is on the chart

Three places to look, in this order: the DO THIS row at the top of the table (what to do now), the labels on the bars (what happened, and where), the lines (context). Here is every idea in this guide and exactly where it shows up.

The core idea in one picture

Idea On the chart In the table (top-right) Why you care
The mean
5-day average intraday, 20-day on a daily chart
The one thick gold line. It has no name tag — it is the only thick line on the chart Basis row: 5DMA (975 bars) Everything is measured from here. Plays enter here; Fades finish here
One “normal day” (ATR)
how far this stock usually moves in a day
Not drawn as a line. It is the gap between the gold line and the first band — one ATR D ATR(20) row: 4.82 (2.1%) The ruler. Every distance below is “how many of these”
How stretched price is right now
(the old guide calls this “extension”)
Where the current bar sits relative to the bands. Between the gold line and the green band = normal. Past yellow = stretched 5DMA ext row: 1.35 ATR (live) — colored green <1 · yellow 1–2 · orange 2–3 · red 3+ The single most useful number. Positive = above the mean, negative = below
The same thing as a word — State row: NORMAL / STRETCHED / EXTENDED / EXTREME, same colors. Changes only on bar close so it does not flicker Glance-able version of the row above
The ±1 and ±2 bands Solid green lines = ±1 ATR · solid yellow lines = ±2 ATR · faint yellow wash between them — The Fade triggers when price closes back inside the yellow band. The Play’s first target is the next band out
The ±3 and ±4 levels Not drawn as lines (four sets of lines buried price). You see them only as +3 ATR / −4 ATR text tags the first time price reaches them each day Felt through the State row turning orange / red Extreme. Never chase here
Band tags +1 ATR … −4 ATR Small text labels on the bar where price first reached that level today. One per level per day — Information only. They are a ruler, not a signal. They print whether or not a trade exists
The furthest price got today Off by default (setting: Mark each day’s max extension) Day max ext row: 2.15 ATR “Has this stock already had its big move today?”
How much of a normal day is already used Not drawn DTR / ATR row: 0.82 (82%) — <50% fresh · <75% · <100% tired · ≥100% spent Red = a full day’s range already happened. Chasing here is buying someone else’s exit

The two trades

Idea On the chart In the table Why you care
“What should I do right now?” The most recent ▲ ▼ △ ▽ ◔ ◑ ● ✗ label DO THIS row (top). One sentence, colored by the verb Read this before anything else
“Stretched far enough to snap back”
= the Fade (day trade)
F2 △ FADE LONG / F3 ▽ FADE SHORT label on the bar that closed back inside the ±2 band, with stop and T1 printed. Then ◐ T1, ● T2 basis or ✗ STOP as it plays out DO THIS row while it is open: HOLD fade F2 · stop · next: …. No row of its own Enter on the label, not on the band touch
“Closed back through the mean after a real pullback”
= the Play (swing)
#7 ▲ LONG / #8 ▼ SHORT label with stop and T1. Faint green or red background tint while it is on. Then ◔ 30%, ◑ 50%, ● EXIT or ✗ STOPPED / ✗ VOID P&R play row: – flat · PENDING ↑ confirm · LONG play · T1✓ T2— · +1.8R. Cell turns dark green / dark red while a Play is open The tint tells you at a glance whether a Play is live. The row tells you which targets have paid
“Almost a Play” — the tripwire ⋯ short dotted gray line at yesterday’s high or low, drawn for up to 3 sessions — A confirmed close through it opens the Play anyway. Until then, wait
“Not good enough” ✗ fail · ✗ reclaim filtered (no depth / 1-day flip / basis falling) gray labels — No trade. Each one says why
The 50% exit line for the Play
= the Trail
The 4-color line (teal / yellow / red / orange) with a Trail tag at the right edge, plus a matching faint cloud — Teal = healthy long, red = healthy short, yellow/orange = disagreeing. A close through it after it turns = ◑ 50%

Context lines (read them, don’t trade them)

Idea On the chart In the table Why you care
Today’s VWAP (≤65m charts) Purple line, tag VWAP, with its own ±1 / ±2 ATR bands drawn as dotted circles (so you can tell them from the solid mean bands) VWAP ext row: 0.40 ATR, same green→red colors Intraday timing. No trade fires from it
Where the last 2 days / week / month are being accumulated blue 2-Day · green WTD · teal MTD — each starts exactly at its anchor, tag at the right edge — A long Play with all three below price has room. Pinned under all three, it is fighting every timeframe
Is the short-term trend healthy? The cloud between price and the 5 DMA: green (MA rising + price above) · red (falling + below) · grey (they disagree) — Grey means don’t trust the direction yet
Longer averages Thin lines with tags: 7x30m / 17x30m / 33x30m on 30–65m charts; 10 DMA … 200 DMA on longer charts. Which ones appear depends on your timeframe — Swing / position context
What do the glyphs mean? Legend box, bottom-left (toggle: Show symbol legend) — Leave it on until ▲ ◔ ◑ ● ✗ △ ▽ are second nature
Hover anything. Every label, every right-edge tag and every table cell has a tooltip with the live value, what it is anchored to, and — for trade labels — the entry, stop, targets and why that stop was chosen.

The labels are the instructions

Every trade label carries a number (#7 for Plays, F2 for Fades). Every later label with the same number belongs to the same trade. Hover any label for the full story.

Play labels (swing trade)

Label says What it means What you do
⋯ dotted gray line A reclaim was almost good enough. The prior day’s high (or low) is now armed as a tripwire for up to 3 sessions WAIT — trade only if the line breaks with a confirmed close
PENDING ↑ confirm (table only) Yesterday’s daily close crossed the mean. Waiting for today’s first bar close to hold the right side WAIT — do not front-run it
#7 ▲ LONG · stop 92.40 · T1@1ATR 1.8R Long Play just opened. Stop and first target are on the label GO LONG (research), stop at 92.40
#7 ▲ LONG (brk 94.10) · stop … Same, but entered because price broke the armed tripwire instead of a clean reclaim GO LONG, stop shown
#8 ▼ SHORT · stop … · T1@… Short Play just opened (mirror of the above) GO SHORT, stop shown
#7 ◔ 30% · +1.1R Price reached the first ATR band beyond the entry TAKE 30% OFF
#7 ◑ 50% · +2.4R Price closed back through the trail line and the trail has turned against you TAKE 50% OFF (you now hold 20%)
#7 ● EXIT 20% · +2.7R A daily close went back through the mean against you. The number is how much was left (20 / 70 / 100%) CLOSE THE REST
#7 ✗ STOPPED · −1.0R A confirmed close beyond the stop EXIT — you should already be out
#7 ✗ VOID Entry day only: price closed back through the mean before the first target paid. Setup was a fake EXIT flat — no re-entry from this signal
✗ fail The reclaim didn’t hold at the next open. No Play opened AVOID — nothing to do
✗ reclaim filtered (…) A reclaim happened but failed a quality check — no depth, 1-day flip, or basis falling/rising (mean moving against it) AVOID — but watch for the dotted tripwire line

Fade labels (day trade)

Label says What it means What you do
F2 △ FADE LONG · stop 88.10 · T1 90.25 · 1.4R Price was more than 2 ATR below the mean and just closed back inside. Bet on the bounce back up GO LONG (day trade), stop at the low of the stretch
F3 ▽ FADE SHORT · stop … · T1 … Price was more than 2 ATR above the mean and just closed back inside GO SHORT (day trade), stop at the high of the stretch
F2 ◐ T1 · +1.4R Price got back to the 1 ATR band TAKE HALF OFF
F2 ● T2 basis · +2.9R Price reached the mean. That was the trade CLOSE THE REST — done
F2 ✗ STOP · −1.0R Price made a new extreme past the stretch. The move was not exhausted EXIT — you should already be out
✗ re-entry filtered (off by default) A fade trigger fired but was blocked — either a Play is open the other way, or the trail MA says the trend is still strong AVOID
Band tags like +2 ATR / −3 ATR are information, not signals. They mark how far price is from the mean — one tag per level per day. They print whether or not a trade exists. Do not trade off them; wait for a ▲ ▼ △ ▽ label.
Nothing here closes at the bell. A Fade is meant to be a day trade but the tool will not flatten it for you — it ends only at its stop or the mean. If you want to be flat by the close, that is your job, and the labels will keep printing for a position you no longer hold.

The table (top-right)

Nine rows. The first is the instruction; the rest are the readout behind it. Colored cells go green → yellow → orange → red as things get more stretched or more used up.

Row Example What it tells you
DO THIS HOLD the long play #7 · stop 92.40 · open +0.8R · next: 30% off at 98.02 Read this first. One instruction, colored by the verb. Full list in DO THIS row
Basis 5DMA (975 bars) Which mean is in use and how many bars build it. Hover for session detection — if it shouts MISMATCH, fix Session length in settings before trusting anything
D ATR(20) 4.82 (2.1%) One “normal day” of range in dollars and as % of price. This is the unit every distance is measured in
5DMA ext 1.35 ATR (live) How far price is from the mean right now, in normal days. Positive = above, negative = below
State STRETCHED ✓close NORMAL (<1 ATR, green) · STRETCHED (1–2, yellow) · EXTENDED (2–3, orange) · EXTREME (3+, red). Only changes on a bar close, so it doesn’t flicker
VWAP ext (≤65m charts) 0.40 ATR Same idea, but distance from today’s session VWAP instead of the mean. Context for timing intraday — no trade fires from this
DTR / ATR 0.82 (82%) How much of a normal day’s range has already been used today. Green <50% = fresh · yellow <75% · orange <100% = tired · red ≥100% = a full day already happened, be careful chasing
Day max ext 2.15 ATR The furthest price got from the mean today
P&R play LONG play · T1✓ T2— · +1.8R The open swing Play: direction, which targets have paid (✓), open R. – = flat. PENDING ↑ confirm = waiting for today’s first close

Tooltips — short or detailed

Hover any table cell, any right-edge line tag, or any trade label. Extension readout → Detailed tooltips switches what you get:

Detailed tooltips = ON

Default. Each table cell explains:

  • What it is — in plain words, with the actual numbers on the cell
  • How it’s calculated — e.g. (close − mean) ÷ daily ATR
  • What the colors mean
  • A five-line trade read: GO LONG · GO SHORT · HOLD · WAIT / AVOID · EXIT — what this number means for each

Detailed tooltips = OFF

One line per cell — the value in words plus the trade read. For when you already know the tool and just want the reminder.

The DO THIS tooltip always decodes the numbers on its line (trade #, stop, R, target) in either mode.

Line tags and trade labels have their own tooltips regardless of this setting: a line tag tells you its value, what it is anchored to and how far back it reaches; a trade label tells you the entry, stop, targets and why that stop was chosen.

The ATR ruler

Every distance is in daily ATRs. Here is what each level means for you.

+3 / +4 ATREXTREME. Rarely holds into the close. Never chase here. If short-fading, this is where the stretch extreme (your stop) lives
+2 ATREXTENDED — the fade level. Price closing back under +2 after being above it = ▽ FADE SHORT
+1 ATRSTRETCHED. Moving with purpose. First target for a long Play (◔ 30%), and T1 for a fade short coming back down
MEANThe gold line. Where the Play enters. Where the Fade finishes (● T2 basis)
−1 ATRMirror of +1
−2 ATRThe fade level for longs. Price closing back over −2 = △ FADE LONG
−3 / −4 ATREXTREME
Only two band pairs are drawn (defaults ±1 and ±2). The engine knows all four levels — the State row and the tags use them — but four sets of lines buried price, so the rest is measured, not painted. Change the multipliers in Mean bands if you want to see ±3.

Trade 1 — the Play (swing, days to weeks)

“Buy the reclaim.” Price pulled away from the mean for days, then a daily close took it back. Once that reclaim proves itself, you ride the new side.

How a long Play is born

  1. 1
    Price closes below the mean for at least 2 daily closes in a row. (One-day dips don’t count — they print ✗ 1-day flip.)
  2. 2
    While below, price dips at least 0.5 ATR under the mean — “the bowl needs depth.” The lowest low of that dip becomes the stop. (Shallow touches print ✗ no depth.)
  3. 3
    A daily close comes back above the mean, and the mean itself is flat or rising — not still falling. (Otherwise ✗ basis falling.)
  4. 4
    Table shows PENDING ↑ confirm. Nothing prints yet. Wait.
  5. 5
    Next session, the first confirmed bar close holds above the mean → #N ▲ LONG prints with stop and T1. Go long. If it fails at the open → ✗ fail, no trade.

A short Play is the exact mirror: 2+ closes above, a 0.5 ATR bulge above (its high = stop), a daily close back below with the mean flat-or-falling, then a confirmed hold below.

Second chance — the tripwire. If the reclaim gets filtered (depth / slope / flip / fail), the tool does not give up. It arms the prior day’s high as a ⋯ dotted gray line. A confirmed close through that line within 3 sessions opens the Play anyway — the label says (brk 94.10). Structure proving the turn instead of waiting for a new daily cycle.

Managing the Play — the 30 / 50 / 20 ladder

EventTriggerYou do
✗ STOPPED A confirmed close beyond the stop (bowl low, capped at 2 ATR from entry) Exit 100%. Risk is defined — this is the −1R outcome
✗ VOID (entry day only) Before T1 pays, a confirmed close back through the mean by 0.10 ATR Exit — the reclaim was a fake. From day 2 on this rule switches off and only the ladder / stop / daily closes matter
◔ 30% Price reaches the next whole ATR band beyond the entry (usually +1; if you entered already past +1, it’s +2, and so on up to +4) Take 30% off. Label shows the R banked
◑ 50% A confirmed close through the trail line (the 510-minute MA) and the trail has turned against you. A poke through a still-rising trail does not count Take 50% off. You are down to 20%
● EXIT 20% A daily close back through the mean against you Close the rest. If T1/T2 never paid, this says EXIT 70% or EXIT 100% instead
R always uses the original risk. Entry-to-stop at the fill is 1R for the life of the trade. Stop moves never rewrite the score. The Max stop distance setting (default 2 ATR) caps how far the structural stop may sit — so risk per trade is bounded by a setting, not by whatever the pullback happened to be.

Trade 2 — the Fade (day trade)

“Fade the stretch.” The dog ran two days of leash and turned around. Bet on the walk back.

  1. 1
    Price pushes beyond ±2 ATR from the mean. Band tags +2 ATR print. Do nothing yet — this is the stretch, not the trade.
  2. 2
    Price closes back inside the 2 ATR band. That is the trigger.
  3. 3
    Two filters must agree: the trail MA must not be screaming trend (rounding over / broke a recent 2-bar low or high), and there must be no open Play the other way (regime gate). If blocked, nothing prints (or a gray ✗ re-entry filtered if you turn that on).
  4. 4
    F2 ▽ FADE SHORT prints with stop = the high of the stretch (capped 2 ATR), T1 = the +1 band, T2 = the mean. Go short.
  5. 5
    ◐ T1 → half off at the 1 ATR band. ● T2 basis → the rest off at the mean. Done. Or ✗ STOP → price made a new high, the move was not exhausted, you’re out.
Why the stop is the extreme. The whole thesis is “the move is exhausted.” If price makes a new extreme past where it turned, the thesis is simply wrong — there is nothing to wait for. Same reason there is no trail and no third target: a fade is not held for trend.

Lines on the chart

Every line has a name tag at its right edge. Hover the tag for its value, what it is anchored to, and how far back it reaches. Which lines appear depends on your timeframe (see Timeframes).

LineColorWhat it isHow to use it
Basis (the mean) gold, thick 5-day average (intraday) / 20-day (daily+) Every trade is measured from here
Mean bands ±1, ±2 green ±1 · yellow ±2 The ATR ruler, drawn Fade trigger at ±2; Play first target at the next band
Trail 4 colors — teal yellow red orange 510-minute MA (17 bars on a 30m, 255 on a 2m — same real line on every frame) ◑ 50% exit line for the Play. Teal = above & rising (healthy long) · red = below & falling (healthy short) · yellow / orange = disagreeing, be careful
Session VWAP + bands purple Today’s volume-weighted average, with its own ±1 / ±2 ATR bands. Charts ≤65m only Intraday timing context. No trade fires from it
2-Day blue VWAP since yesterday’s open (rolling, always exactly yesterday + today) Short-term fair value once today’s VWAP has drifted
WTD / MTD green · teal VWAP since the week / month opened A long Play that can’t hold above WTD is not working
YTD, YTD High/Low, Earnings (off by default) grey / greens / purples Longer anchors. YTD High/Low re-anchor on each new extreme by design Investor context. Turn on when needed
30-min MAs 7 / 17 / 33 red · blue · green Counted in 30-minute bars, rescaled to your chart (7×30m = 14 on a 15m) Tactical trend reads on 30–65m charts
Daily MAs 10 / 20 / 50 / 200 red · blue · green · tan Built from chart bars (N days × bars per day). 200 DMA needs a 30m+ chart to have enough history Swing / position context on longer frames

Colors & tints

Background tint

  • Faint green — a long Play is armed / open
  • Faint red — a short Play is armed / open
  • None — flat

The cloud (price vs the 5 DMA)

  • Green — MA rising and price above it → healthy up
  • Red — MA falling and price below → healthy down
  • Grey — the two disagree (e.g. price poking above a falling MA) → neutral, don’t trust it

Trail cloud

  • Same three states, shaded off the trail line. Built from the same variables as the line color so they can never disagree
  • Where the 5 DMA and trail sit far apart the two washes overlap — raise transparency or switch one off

Table cell colors

  • Green → yellow → orange → red = normal → stretched → extended → extreme (ext rows) or fresh → tired → used up (DTR row)
  • Dark green / dark red P&R cell = a Play is open long / short

Timeframes

The signal is always daily. A “session” means one trading day, never your chart interval. The chart interval only decides how precisely the entry fills — a 2-minute chart gives you daily reclaims filled with 2-minute precision, not 2-minute reclaims.

Each line draws only where it means something (“Scope lines by timeframe”, on by default). Engines, alerts and the table run on every frame regardless.

ChartRoleWhat you see
≤ 30 min Execution Mean + bands, session VWAP + bands, trail, 2-Day, cloud
30 – 65 min design frame Tactical All of the above + 7/17/33 30-min MAs, WTD. The trail is exactly 17 bars on a 30m — this is what the tool was built around. Start here.
65 – 195 min Swing Mean + bands, trail, 10/20 DMA, WTD, MTD. Session VWAP and 2-Day switch off
195 min – daily Position 20/50/200 DMA, MTD, YTD. No trail
Daily and up Investor Mean becomes the 20 DMA. 20/50/200 DMA, YTD, YTD High/Low, earnings anchors. A “reclaim” here = a daily close back across the 20 DMA
Under 10 minutes works but is noisier — the bowl reads deeper off finer lows and the ladder trips on wobblier bars. Same signals, worse execution discipline.

How to set it up (first time)

  1. Use a 30-minute chart to learn it. Move to 5m / 15m for fills once the labels make sense.
  2. Add the indicator AM ATR v4.23-CL.
  3. Leave Intraday basis mode = 5DMA and Session length = Auto.
  4. Hover the Basis row in the table. If it says MISMATCH, set Session length to Manual and type the number it gives you (24-hour equity charts need 1440).
  5. Leave Signal label style = Compact symbols. Switch to “Full text” only if you want sentences instead of ▲ ◔ ● glyphs.
  6. Leave the symbol legend (bottom-left) on until you know the glyphs.
  7. Read the DO THIS row. If it says NO TRADE — nothing armed, there is nothing to do.

Settings that actually matter

Basis

5DMA intraday, 20 on daily. Changing these changes what “the mean” is — every signal follows. Leave alone unless you know why.

Pullback & Reclaim (the Play)

  • Reclaim depth 0.5 ATR — how deep the bowl must be. Raise for fewer, cleaner Plays
  • Min daily closes 2 — kills one-day flip-flops
  • Max stop distance 2 ATR — hard cap on risk per trade
  • Break-confirm window 3 — how long the tripwire stays armed
  • Exit on stop = ON — turn off only if you manage stops in your broker

Fade

  • Manage the fade = ON — off reverts to a tag with no stop and no exits
  • Regime gate = ON — no fades against an open Play
  • Fade filter = Both — trail must be rounding and a 2-bar high/low must break

Display

  • DO THIS row = ON — off gives the v4.23 readout-only table
  • Detailed tooltips = ON — off gives one-line tips
  • Line name tags — each line (2-Day, WTD, MTD, YTD…, each 30-min MA, each DMA) has its own tag checkbox on the same row as its on/off and color. The group toggle (“Label each line at the last bar”) is the master; both must be on. VWAP and Trail have their own toggles in their groups
  • Band tag frequency = One per tier — “Every crossing” stacks four +2 ATR labels on one consolidation
  • Cloud transparency 92 — lower for a stronger wash
  • Scope lines by timeframe = ON — off shows every toggled line on every frame
Style tab warning. The AVWAP lines (2-Day, WTD, MTD, …) are drawn as polylines, so the Style tab checkboxes only hide their status-line readout, not the chart line. Toggle, color and width them from the Inputs tab.

Alerts & logging

  1. Create one alert on this indicator.
  2. Condition: Any alert() function call.
  3. In the indicator’s Alerts group, tick the classes you want: band crossings, VWAP extension, DTR exhaustion (75% / 100%), fade triggers, Play open/fail/void, ladder (T1 / T2 / EXIT). “Reclaim filtered” is off by default — it is noisy.
  4. Payload is JSON by default with live values — price, mean, ATR, extension, entry, stop, every target as an absolute price, risk, R, trade ID. Switch to Plain text if you just want a phone notification.
  5. Optional: Also write to Pine Logs mirrors the exact string into the Pine Logs pane so you can read the JSON without a webhook.
  6. Alerts are real-time only — they do not backfill history.

Cheat sheet

GO LONG when

  • A #N ▲ LONG label prints (swing) — stop is on the label
  • Or an Fn △ FADE LONG label prints (day trade) — stop is the stretch low
  • Trail is teal (above & rising) and cloud is green — extra confidence, not required
  • 2-Day / WTD / MTD sit below price — room to run

GO SHORT when

  • A #N ▼ SHORT label prints
  • Or an Fn ▽ FADE SHORT label prints
  • Trail is red, cloud red, VWAPs stacked above price

WAIT / AVOID when

  • Table says PENDING confirm — do not front-run
  • Only a ⋯ dotted tripwire is showing — not yet
  • Only +N ATR band tags are printing — information, not a signal
  • Any ✗ fail / ✗ filtered label
  • State is EXTREME (red) and you are thinking of chasing
  • DTR / ATR ≥ 100% (red) — the day is already spent
  • Basis tooltip says MISMATCH

TAKE OFF / EXIT when

  • ◔ 30% / ◐ T1 — first target
  • ◑ 50% — trail broke and turned
  • ● EXIT / ● T2 basis — close the rest
  • ✗ STOPPED / ✗ STOP / ✗ VOID — you should already be flat
  • Fade still open at the close and you meant it as a day trade — flatten it yourself

Common mistakes

  1. Trading a +2 ATR band tag as if it were a fade signal. The fade is the close back inside (△ / ▽), not the touch.
  2. Buying on PENDING confirm. Half of these fail at the next open (✗ fail). Wait for the ▲.
  3. Treating ◔ 30% as “the trade is over.” It is the first of three exits.
  4. Ignoring ✗ STOPPED because you “still like it.” Before v4.19 the tool didn’t enforce stops either — and those forward tests were wrong.
  5. Holding a Fade overnight because the tool didn’t close it. It never will.
  6. Chasing when DTR / ATR is red. A full normal day has already happened.
  7. Trying to hide an AVWAP line from the Style tab. Use Inputs.
  8. Running a 200 DMA on a 5-minute chart and wondering where it went — it needs 30m+ for enough history.

Quick daily checklist

  1. Basis tooltip — no MISMATCH?
  2. What does DO THIS say?
  3. P&R play row — flat, PENDING, or LONG/SHORT with T1/T2 status?
  4. Any new ▲ ▼ △ ▽ label since yesterday? Read its stop and T1.
  5. If in a Play — has ◔ ◑ ● or ✗ printed on my trade number?
  6. State and DTR / ATR colors — green/yellow OK to act, orange/red slow down.
  7. Trail color and cloud agree with my direction? (teal+green long, red+red short)
  8. Any open Fade I meant as a day trade — flat by the close.